Types of Profiles

Wood products come in a variety of profiles. We list the options on the products page of our website as well as on the cut sheets provided on product pages and on Material Bank. Here is a run-down of a few of our most popular options.


Tongue & Groove - No Bevel

Tongue and Groove without a micro-bevel is a popular choice for solid flooring products.  This is a good choice when you will be site-finishing flooring, or using wall cladding in which a reveal or bevel would expose contrasting color/texture tones not appropriate for the design.  


Tongue & Groove with a Bevel

Tongue and Groove with a micro-bevel is our standard for ThinClad and solid wood flooring products. The micro-bevel will reduce the prevalence of over-wood/under-wood (plank surfaces not lining up perfectly in thickness, normal to the living and moving qualities of wood) when you are installing pre-finished products.

Tongue & Groove with a Reveal

Tongue and Groove with a reveal is a common standard for many of our wall cladding products because it eliminates the exposure of over-wood/under-wood in installation. This profile looks very much like shiplap with a reveal, but the T&G allows for concealed fasteners. Typically our reveals are a 1/4" square channel.


Shiplap

Shiplap affords wood to live and breath for exterior siding applications. It can be milled with or without a reveal. It is typically installed by nailing into the square channel in combination with face-nails near the top "lap" of the board. V-channel and pillowed edges may be customized.

 

Square Edge Plank

Square Edge Plank is the most simple & typically most economical profile. It is a simple flat edge as you'd expect for a simple plank. A square edge plank will typically be installed with pin nails through the face.

 

WoodologyAnthology Woods