Solid vs. Engineered Wood Flooring

What’s the Difference Between Solid and Engineered Flooring?

We often get this question. We usually make recommendations based on where the floor will be located and what it will be installed over.

Once installed, quality engineered wood will be difficult to distinguish from solid wood (usually the finish, and how the planks lay together will be the signals). With our thick wear layers it can also be sanded and refinished. Engineered planks are great when your project lends itself to a pre-finished product and interior cladding. Engineered wood boasts increased stability and is well-suited for below-grade installations, a variety of subfloors, and radiant heat environments. It also affords the option of a floating installation.

Solid wood lends itself well to site-finishing, and will provide the option to sand & refinish several times. We recommend solid, site-finished wood for most flooring applications for an optimal finish and a more tailored result. The thicker a solid wood flooring product, the less prone it will be to cupping, warping, etc.


Evaluating Engineered Value

Not all engineered wood is created equally. Anthology provides engineered products with only hefty wear layers (typically 4 to 6mm thick) so you can refinish if needed. Our engineered products utilize a quality FSC-certified new wood birch plywood substrate whenever possible for a sustainable, smooth, and stable product.


Above the Tongue

Above the Tongue is a quick-reference for comparing how many times you can refinish flooring products. The thicker the solid wood (or wood wear layer) is above the tongue, the more potential there is for sanding & refinishing, and therefore the longer potential lifespan and better value for your investment. Once the tongue is reached in sanding, the grooves can no longer lock the wood in place, and it's probably time for a new floor.

WoodologyAnthology Woods