Refreshing Wood Floors
Renewing Wood Flooring
Before you decide to renew your wood flooring, you should understand how it got to be in its present condition. That way, you’ll be prepared for establishing a plan for action. In addition to consulting with a qualified flooring professional, we recommend referring to this guide to assess the situation:
Refreshing Polyurethane Floors
This is a topic that deserves its own website. We’re not the only place you should go for advice about refreshing your polyurethane floor. We recommend consulting and using a reputable floor refinishing professional to get the best results. We’re going to refer you to our friends at the National Wood Flooring Association for the best advice.
Refreshing Oil Finished Floors
If you purchased your floor from us with an oil finish, here are our general recommendations. Please refer to the paperwork we gave you when we sold you the floor or reach out to us if you don’t know exactly the exact finish we used.
We generally use Rubio Monocoat Oil Plus 2C to place an oil finish on flooring.
You can find the manufacturer online here (and you can also find their products at retailers like Amazon). If you go to the Interior tab, and then to the Cleaning and Maintenance sections you can find various products that are used to maintain or refresh the oil finish. In each product area you can find instructions for use, and other technical information.
We highly recommend cleaning by “damp” (not wet) mopping with the diluted Rubio Soap product (follow their directions). It will make an immediate difference. In addition here are some basic maintenance guidelines:
Regular Cleaning
Regularly vacuum and/or sweep your floor to minimize grit and dirt.
Clean any wet spills immediately. You can use a damp cloth, but do not flood with water.
Cleaning can also be done with Rubio Soap.
Follow the manufacturer instructions for Rubio Soap on their website. Using concentrated soap will leave a sticky film, so dilute according to manufacturer.
Do not use other cleaning products as many of them have solvents that will break down the oil finish.
Use Rubio soap, or just plain water.
NEVER wet mop your floor, “damp” mop only using a micro-fiber or other non-abrasive tool.
Refreshing the oil finish
Periodically you may want to refresh your finish with Rubio Renew.
This can be done as spot maintenance to repair scuffs, scratches or areas dulled by high traffic, or the entire floor can be refreshed too.
In a typical household (kids, dogs, etc) this is something that may need to be done every few years.
You may choose to refresh high use areas more frequently.
The Renew product is for floors with Pure oil only.
Colored floors should choose the appropriate color Universal Maintenance Oil product.